Search Result - Shenzhen Puhuixin Tecnhnology Co., Ltd.

All Related Products Other Content

FTTH-004 Optical Fiber Terminal Box Industry Standard User Interface, be made of high-impact plastic. Can accommodate 1x4 & 1X8 PLC splitter. Anti-UV, Ultra violet resistant, and rainfall resistant. Up to 8 FTTH drops. Wall and pole mountable. 2 inlet ports, 8 outlet ports. Special cable fixed position, ensure the cable fixed pulled off the force after not less than 50 N.
C-lens Fiber Optic Collimator PHX optical collimator adopts micro optical fiber lens and unique manufacturing process. It has many advantages that traditional optical fiber collimator cannot match, such as small spot diameter, high coupling efficiency, high return loss and high optical power rate. It has passed the examination of GR-1209-Core & GR-1221-Core, making ultra-small optical fiber device possible.Including Faraday mirror, variable optical attenuator and a variety of passive fiber devices; It is especially suitable for making all kinds of small optical fiber sensor probes, and can provide different tail-fiber ultra-small optical fiber collimator according to the needs of customers.
1G/10G Enterprise Switches High Reliability; Outstanding QoS Control; Triple-play Service Support; Comprehensive Network Security Policy.
Applying Glue for PLC Splitter
Do You Know about Coarse Wavelength Division Multiplexers? Coarse Wavelength Division Multiplexer (CWDM) is a wavelength division multiplexing technology that supports multi-protocol transmission. The Coarse Wavelength Division Multiplexer (CWDM) system uses.
IP-Series MPO Cost-effective solution for in-house termination. Low insertion loss and added loss. Height of attenuation. IP67 water, dustproof, and corrosion-resistant. The material in the jumper cable is all-weather and UV-resistant. RoHS and REACH materials are compliant.
LC Fiber Optic Adapter Fiber optic adapter, also called coupler, is a small device designed to terminate or link the fiber optic cables or fiber optic connectors between two fiber optic lines. By linking two connectors precisely, fiber optic adapters allow the light sources to be transmitted at most and lower the loss as much as possible. At the same time, fiber optic adapters have the merits of low insertion loss, good interchangeability and reproducibility. And each fiber optic Adapter is functionally tested before shipping. r With Flange
4 Port Fiber Optic Circulator PHX's 4-port fiber Circulators are available in single-mode fiber versions. These fiber circulators are ideal for advanced communication systems and fiber sensing applications.
ABS Box PLC Splitter PHX ABS box PLC planar waveguide beam splitter can provide 1x2, 1x4 and 1x32 PLC splitter. The ABS box plc splitter adopts 2mm casing, with compact structure and high stability; SC / APC connector has uniform light distribution and is not sensitive to wave. This kind of fiber optic plc splitter is widely used in FTTH projects and data centers.
Coarse Wavelength Optical Division Multiplexer 1x2 CWDM single device/equipment (3-port) is a wavelength division multiplexer cwdm technology based on TFF (thin film filter), which can effectively save optical fiber resources and networking cost. CWDM module has a variety of package sizes and optional wavelengths. It is composed of three ports: common end (COM), transmission end (pass) and reflection end; The wavelength range complies with ITU-T g.694.2 standard. In the wavelength division multiplexing CWDM system, it can multiplex, demultiplex or add drop multiplex different optical signals, and increase the signal transmission speed and communication capacity. CWDM equipment is mainly used in the convergence and access layer of metropolitan area network, and can build the network and carry out services in a short time.
100G, 200G, 1X2 DWDM Single Device (3 PORTS) 100G, 200G,1×2 DWDM single device has low insertion loss, which makes the DWDM single device have low signal attenuation when used in WDM system to reduce the power requirements for signal transmission. At the same time, DWDM single device has a high degree of isolation, which can fully isolate the signals during multi signal transmission to effectively prevent the distortion of transmission signals caused by mutual crosstalk between signals.
3 Port Multimode Filtered Wavelength Division Multiplexer (1310/1550) PHX's three port filter type wavelength division multiplexer adopts thin-film filter with excellent performance to ensure high-quality optical performance, stability and reliability. The filtered wavelength division multiplexer can realize the transmission and division of optical signals in 1310nm and 1550nm communication windows, and can also realize optical fiber two-way communication. It is widely used in optical fiber upgrading, capacity expansion or the introduction of new integrated services such as radio and television, telecommunications, Internet and so.
Fused WDM Module (1310/1550) PHX's fused WDM can provide 1310 / 1550, 1x2, 2x2 combination or separation of different wavelengths of light. Fused WDM modules have very low insertion loss, low polarization dependence, high isolation and excellent environmental stability. These Fused WDM modules have been widely used in cable TV, WDM networking, optical fiber sensor, optical fiber communication, and optical fiber instrument.
Nx1 Pump Combiner N×1 The multimode pump combiner of PHX is specially designed to be used in the field of high-power fiber lasers and fiber amplifiers to synthesize multiple multimode pump light into one fiber for transmission. High pump efficiency, low insertion loss, single arm bearing power up to 300W, stable and reliable performance. It is widely used in fiber laser, fiber amplifier, optical communication and so on.

«
1 ...
4
5
6
7
8
9
10
... 27
»